Canon Pixma CH-70 Tri Color Printhead
CH70_HSN:84439952
₹1,390
Compatible with Canon Pixma Printer G1020, G2020, G2021, G2060, G3020, G3021, G3060, G5070, G6070, G7070, GM20700, GM4070
In stock
1
Product Details
UPC:
4549292135107
Brand:
Canon
Model no.:
CH-70
Generic Name:
Printhead
Product:
New
Colour:
Color
the Print Head
- G7000 series - G7010 G7011 G7030 G7040 G7050 G7060 G7065
G7070
If the print quality is not improved even after maintenance such as cleaning, replace a print head.
Replacing Procedure
When you need to replace a print head, follow the procedure below.
Important
- Do not touch the electrical contacts (A) or print head nozzle (B) on a print head. The printer may not print properly if you touch them.
- Replace a print head immediately and do not leave the printer with the print head removed.
- Check that printer is turned on.
- Press the Setup button, use the button to select Maintenance, and then press the OK button.
- Use the button to select Start replacement, and then press the OK button.
- Open scanning unit / cover (C).
- If the ink stains the print head and/or the inside of the printer, wipe them using a soft cloth dampened with water before installation. Be careful not to get ink on your clothing or surroundings when replacing the print head.
- Do not touch the metallic parts or other parts inside the printer.
- Turn the ink valve lever to the left.
- Press the OK button.The print head holder (D) moves.
- Do not hold the print head holder to stop or move it forcibly while the print head holder is working. Do not touch the print head holder until it stops completely.
- If the scanning unit / cover is left open for more than 10 minutes, the print head holder may move and the Alarm lamp may light. In this case, close the scanning unit / cover, and then open it again.
- Remove the print head.
- Pinch the tabs and open the print head locking cover.
- Pull the print head and shift it slightly toward you.
- Take out the print head.
- Handle the print head carefully to avoid staining of clothing or the surrounding area.
- Discard the removed print head according to the local laws and regulations regarding disposal of consumables.
- Pinch the tabs and open the print head locking cover.
- Prepare a new print head.
- Take a new print head out of its package and peel the label (E) gently.Install the print head C (color) in the left print head holder and the print head B (black) in the right print head holder. Make sure to check the label and install the the print heads correctly.
- Remove the protective tape (F) gently.
- Do not reattach the removed label and protective tape. Discard them according to the local laws and regulations regarding disposal of consumables.
- Do not touch the electrical contacts or print head nozzle on a print head. The printer may not print properly if you touch them.
- Take a new print head out of its package and peel the label (E) gently.Install the print head C (color) in the left print head holder and the print head B (black) in the right print head holder. Make sure to check the label and install the the print heads correctly.
- Install the print head.
- Put a new print head in the print head holder.
- Close the print head locking cover to lock the print head into place.Push down the print head locking cover until it clicks.
- Put a new print head in the print head holder.
- Push the joint buttons.
- Push down the joint buttons until they click. The printer may not print.
- Check that both the left and right joint buttons are pushed down.
- If both the print head C and print head B are not installed, the printer cannot print. Make sure to install both of the print heads.
- Turn the ink valve lever to the right.
- Close the scanning unit / cover gently.
- If an error message is displayed on theLCD (Liquid Crystal Display) after the Scanning Unit / Coveris closed, take appropriate action.
- The printer starts cleaning the print head automatically. Do not perform any other operations until the printer completes the cleaning of the print head.
- If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar symptoms, adjust the print head position.
- The printer may make noise during operation.
Save this product for later
Display prices in:
INR